Fischer-Tropsch waxes are synthetically produced in a controlled manner from carbon monoxide and hydrogen as feed. This results in their consistently high quality.Fischer-Tropsch waxes consist mainly of saturated, straight chain hydrocarbons with almost no branches.
Fischer-Tropsch (FT) wax is a synthetic wax produced by the polymerization of carbon monoxide under high pressure, a technology used in the emerging natural Gas to Liquid (GTL) projects. The hydrocarbon product of FT reaction is distilled to separate the mix into fuels products and waxes with melting points ranging from about 45 - 106ºC.
Fischer-Tropsch is a method for the synthesis of hydrocarbons and other aliphatic compounds from synthesis gas,a mixture of hydrogen and carbon monoxide in the presence of a catalyst. The hydrogen-carbon monoxide gas mixture is obtained by coal gasification or natural gas
reforming.
Synthesized hydrocarbons are fractionated to different grades of FT waxes with chain length
up to C100, qualified by their saturated-linear chains, free of aromatics, sulphurs and
nitrogens.Modification and micronisation also render to grades.
The combination of a high melting point, low viscosity and excellent hardness, even at elevated temperatures, provides superior performance in a variety of applications. State of the art fractionation, micronisation and modification render a wide range of waxes with different physical and chemical characteristics.The major applications also include Rubber Industry,Cosmetics, Inks,Paints & Coatings, Polyolefin, PVC & Masterbatch Processing, Hot Melt Adhesive, Polish,etc
Synthetic Wax Fischer Tropsch Wax
Specification:
Type: Super fine fischer-tropsch wax
Melting point, density, grain size (According to customer's requirement)
Super fine fischer-tropsch wax
1. White micropowder
2. Small particle size
3. Damage Resistant
4. High performance on transparency and hand feeling
5. Superiority at dispersion aspect, anticaking
Super fine fischer-tropsch wax
Widely application: Solvent wood coatings system, pait&ink, industry stoving varnish, enamel polyester paint, masterbatch, plastic system, etc.
Volume of addition: With 0.3-2% of whole volume, should better be used before testing depend on different systems.
Softening Point ( °C )
|
98 ± 2 °C
|
Viscosity CPS@140 °C
|
<40
|
Penetration(mm@ 25 °C )
|
<1
|
Density g/cm 3 @25 °C
|
0.92
|
Acid Value (mgKOH/g)
|
NIL
|
Physical Characteristic
|
Bead
|
Colour Klett
|
White
|
Packaging
|
25Kg/ PP Woven Bag
|
Audited Supplier 
){kind=link}