Grade:
1. Blow molding grade,
2. Injection molding grade,
3. Film grade;
4. Extrusion grade.
Application of LDPE Low Density Polyethylene:
LDPE(low density polyethylene) - is used in products and packaging such as plastic bags, milk jugs, detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn etc...LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and wire coating (cable sheath) etc...They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams.
| Physical Properties |
Test Method |
Nominal Value |
Unit |
| Density |
ISO1183 |
0.921 |
g/cm3 |
| Melt Mass-Flow Rate (MFR) |
ISO 1183 |
1.9 |
g/10min |
| Hardness |
|
|
|
| Shore Hardness(shore D) |
ISO868 |
45 |
|
| Mechanical Properties |
|
|
|
| Tensile Modulus |
ISO572-2 |
175 |
Mpa |
| Tensile Strength |
Yield |
ISO527-2 |
9.0 |
MPa |
| Break |
13.0 |
| Tensile Strain(Break) |
ISO527-2 |
850 |
% |
| Modulus of Elasticity |
Internal Method |
250 |
Mpa |
| Thermal |
|
|
|
| Vicat Softening Temperature(DSC) |
ISO306/A50 |
89.0 |
Centidegree |
| Melting Temperature(DSC) |
DIN 53765 |
108 |
Centidegree |
| Peak Crystallization Temperature(DSC) |
DIN 53765 |
97.0 |
Centidegree |
| Heat of Fusion |
DIN 53765 |
110 |
J/g |
| Electrical |
|
|
|
| Volume Resistivity |
ASTM D257 |
8.5E+15 |
Ohm.cm |
| Dielectric Strength |
ASTM D149 |
30.0 |
KV/mm |
| Dielectric Constant(60HZ) |
ASTM D150 |
2.2 |
% |
| Dissipation Factor(60HZ) |
ASTM D150 |
0.00050 |
|
Audited Supplier 
){kind=link}
){kind=link}