Virgin / Recycled LLDPE Granules From Chinese Factory

• Material: Linear Low Density Polyethylene/LLDPE
• Usage: General Plastics, Specialty Plastics
• Color: White
• Enter Attribute Here (e.g.: Size): Enter Value Here (e.g.: 12 Inches)
• Shape: Granular
• Shelf Life: 24 Months
• Model NO.: LDPE/LLDPE/HDPE
• Export: Global
• Transport Package: 25kg Bag or as Your Request
• Specification: national standard
• Trademark: HY
• Origin: China
• HS Code: 3901902000
• Production Capacity: 2000 Metric Ton/Metric Tons Per Month

Product Description

Virgin or recycled LLDPE granules


Linear low density polyethylene (LLDPE)
Production of linear low density polyethylene to ethylene as the main raw material, 1 - butene or 1 - hexene as comonomer, the catalyst for the gas fluidized bed polymerization. Reaction out of material by granulation, drying, and sent packing.
Performance of linear low density polyethylene non-toxic, tasteless, odorless white particles, density of 0.918 ~ 0.935g/cm3. Compared with LDPE, and the higher softening temperature and melting temperature, there is strength, toughness, rigidity, heat, cold and good, but also has good resistance to environmental stress cracking resistance, impact strength, resistance tear strength properties. And can be acid, alkali, organic solvents.
Use for the production of plastic sheeting, packaging films, laminated films, tubes, hollow containers, wire, cable insulation layer.

Product Description:

1. good quality and reasonable price

2. non-poteonods no smell adurless

3. it can replaced original plastic material, sometimes it can replace new material



Grade:

1. Blow molding grade,

2. Injection molding grade,

3. Film grade;

4. Extrusion grade.

Application:

Fiber (Carpet, Textiles, Upholstery, etc.)
Film (Shopping bags, casting film, multilayer film, etc.)
Blow Molding (Medical & Cosmetic container, Lubricant & Paint container, etc)
Extrusion Molding (Sheet, Pipe, Wire & Cable, etc.)
Injection Molding (Automotive, Electronic, Construction, House wares, Furniture, Toys, etc.)

PROPERTY	UNIT	Data
Melt Flow Index	g/10min	≤1.0
Density	g/cm3	≤0.945
Tensile strength	Mpa	≥14.0
Elongation at break	%	≥600
Brittle temperature at low temperature	°C	≤-76
ESCR ,FO	H	≥500
Carbon Black dispersion	--	--
Tensile strength after thermal aging	Mpa	≥13
Elongation after thermal aging	%	≥500
Dielectric strength	Mv/m	≥25
Volume resistivity	Ω.m	≥1*1014
change rate of tensile strength  after weather aging environment of 0--1008h	%	±25
change rate of elongation  after weather aging environment of 0--1008h	%	±25
change rate of tensile strength  after weather aging environment of 504--1008h	%	±15
change rate of elongation after weather aging environment of 504--1008h	%	±15