Plastic Raw Material Injection Grade Polyethylene HDPE Resin

• Customization: Available
• Carrier: HDPE
• Color: White
• Specification: 25KG

Product Description

HDPE
High density Polyethylene (HDPE): is a highly crystalline non-polar thermoplastic resin produced through the copolymerization of ethylene and a small amount of α-olefin monomer. HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion
LDPE Injection Grade

Tests	Value	Unit
Melt Flow Rate   (MFR)	15	g/10min
Density	0.922	g/cm3
Tensile Yield   Strength	7	Mpa
Elongation at Break	75	%
Wien Softening   Point	85	°C

 
 LDPE Film Grade

Tests	Value	Unit
Melt Flow Rate   (MFR)	2	g/10min
Density	0.9225	g/cm3
Tensile Strength	9	Mpa
Elongation at Break	500	%
Fish eye   max(0.3-2mm)	30	n/1200cm2
Stripes	20	cm/20m3

1.Packing:
In 25kg PP woven bag, or per your requirement.
20mt/20'FCL
2.Storage:
The resin should be stored in a drafty, dry warehouse and away from fire and direct sunlight. It should not be piled up in the open air.
3.Transportation:
During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.